Onye nyocha chọtara ọtụtụ adịghị ike na ndị na-anya ụgbọ mmiri Netgear Nighthawk abụọ

A security researcher has discovered a total of 11 serious vulnerabilities in recent firmware updates for the Netgear Nighthawk routers. The vulnerabilities have been patched by Netgear. For example, the routers store usernames and passwords in plaintext.

Ihe ọghọm nke onye nyocha Jimi Sebree nke ụlọ ọrụ nchekwa Tenable chọtara dị na Nighthawk R6700v3 AC1750-version 1.0.4.120 and in the Nighthawk RAX43, firmware version 1.0.3.96. The vulnerabilities vary, but are all serious to critical according to the researcher, and furthermore not all have been patched by Netgear.

The most critical vulnerability is registered as CVE-2021-45077 for the RS6700 and CVE-2021-1771 for the RAX43. The routers store usernames and passwords for the device and provided services in plaintext on the routers, also the admin password is in plaintext in the primary configuration file of the router, Sebree na-ede na weebụsaịtị ya.

In addition, there is a risk that those usernames and passwords will be intercepted. In the RS6700v3, because the routers ojiji HTTP ọkọlọtọand, instead of Https, for all communication with the web interface. Also the SOAP interface, on port 5000, na-eji HTTP maka nzikọrịta ozi, na-enye ohere ka ejidere okwuntughe na aha njirimara.

Ncha interface

Ọzọkwa, ndị rawụta bụ ngwangwa inye iwu injection site njehie ịgba ntụtụ nrubeisi in the update software of the device. Triggering an update check through the SOAP interface leaves the device vulnerable to takeover via preconfigured values. Also, the UART console echekwabara nke ọma, nke na-enye ohere onye ọ bụla nwere ike ịnweta ngwaọrụ site na ọdụ ụgbọ mmiri UART iji jikọọ ma rụọ ọrụ dịka onye ọrụ mgbọrọgwụ na-enweghị nkwenye.

Also, the router uses hard-coded credentials for certain settings, so that a user cannot normally adjust certain security settings. These are encrypted, but according to the researchers dịtụ mfe ịchọta with publicly available tools, allowing settings to be adjusted by anyone with access to the router. In addition, the router exploits several known vulnerabilities in jQuery libraries and in minidlna.exe, while more recent versions are available.

Netgear Nighthawk R6700

The vulnerabilities in the RS6700 have a CVE score of 7.1 on a scale of 1 to 10. That’s serious, but not critical. The main reason is that an attacker must have physical access to the router in order to exploit the vulnerabilities. In addition, exploiting the vulnerabilities in the SOAP interface is only possible if an attacker is already logged in. The vulnerabilities for the RAX43 have a score of 8.8 out of 10.

RAX43 na-ejikwa HTTP na ndabara, Sebree na-ede, and the uses the same bad jQuery libraries and vulnerable version of minidlna.exe. In addition, the RAX43 firmware has a vulnerability caused by two bugs. The first is a buffer overrun vulnerability, the second a command injection vulnerability. Combining the two allows someone to perform remote tasks as root, without authentication.

Netgear Nighthawk RAX43

Sebree writes that Tenable has notified Netgear of the vulnerabilities on September 30. Although Netgear initially responded to the report of the vulnerabilities in early October, it took a long time before anything was done about it. December 29, Netgear tinye ịdọ aka ná ntị maka adịghị ike na ịntanetị. There are also now mmelite ngwa ngwa maka ma routers put online. Sebree decided on December 30 to disclose the vulnerabilities under the guise of responsible disclosure, even though Netgear has not yet actively pushed the firmware updates to users.

The Nighthawk RS6700 is a series of routers mainly aimed at home use. It is listed as the AC1750 Smart WiFi Router in the Pricewatch, and has been available since July 31, 2019. The vulnerabilities are in the ụdị nke atọ nke rawụta. The RAX43 has been available since December 30, 2020.